TTU-A with short shaft stirrer and pump

TTU devices are thermostatic heads that can serve as ...



TTU devices are thermostatic heads that can serve as replacement unit or a “plug and play” unit to heat a bath or application. This TTU-A version with short shaft stirrer and pump offers the possibility of circulating the spa fluid to an external application.

The TTU-A is used for precise temperature control and offers high reliability under rough circumstances. The TTU-A is made of stainless steel and is an excellent solution to control the temperature in a custom made bath. The pump offers 300 mBar and 7 ltrs per minute flow (no counter pressure). The system can offer an extremely stable working temperature of ± 0.01°C. The exact temperature stability that can be achieved depends on the bath that is used. The set point temperature can be set in steps of 0.01°C. The temperature is displayed in 0.01°C. This two decimal-readout also is available from the RS232 and the free Tamcom software.

The TTU-A can be operated from ambient up to 200°C (41°F..392°F). Due to the “self-heating” of the stirring mechanism, the minimum temperature lies approximately 5°C above the ambient temperature.
The immersion circulator conforms to CE regulation and is equipped with a mechanical resettable safety thermostat and a float to ensure a correct level of the bath fluid.

Features and Benefits

  • Completely made from stainless steel
  • Easy to read display
  • RS232 communication
  • Plug and play unit 
  • Fluid level detection
  • Pump to circulate to an external application
150 150 TTU-A with short shaft stirrer and pump 2021-12-28